A pre-recorded compact disk is read by tracking a finely focused laser across the spiral pattern of lands and pits stamped into the disk by a master diskette. This tutorial explores how the laser beam is focused onto the surface of a spinning compact disk, and how variations between the height of pits and lands determine whether the light is scattered by the disk surface or reflected back into a detector.

The tutorial initializes with the beam emitted from a red laser directed onto a single track on a compact disk by a prism/beamsplitter. The compact disk, although appearing to be stationary in the tutorial, should actually be envisioned as rotating. As the disk rotates, the beam encounters a series of pits and lands that determine whether the beam is reflected back through the lens system into the detector (from a land) or scattered (by a pit). As the sequence of pits and lands is read by the detector, a pattern of ones and zeros, representing the binary encoded data, emerges across the bottom of the window and travels from left to right. In order to reduce the tutorial speed, use the mouse cursor to translate the Applet Speed slider.

The compact disk is rotated by a drive system that regulates the rotation speed, so that data is read at the same speed, regardless of the track location being read by the laser (either on the inside or outer periphery of the disk). As a result, the rotation speed of the disk decreases as the laser detector slowly traverses from the center to the periphery of the disk.

Light from the laser beam must penetrate a thin protective polymer layer (not illustrated) on the disk before striking the reflective coating that contains pits and landings. As the disk rotates, light reflected from landings on the disk strikes the photo sensor producing a series of electrical pulses that are coordinated with a timing circuit to generate a stream of ones and zeros, which reproduce the binary code of information on the disc. At the bottom of the tutorial, a simulated bit reader continuously streams the binary code as it is retrieved from the disc.

---

BACK TO SOURCES OF VISIBLE LIGHT

BACK TO LIGHT AND COLOR

Questions or comments? Send us an email.

© 1998-2022 by Michael W. Davidson and The Florida State University. All Rights Reserved. No images, graphics, scripts, or applets may be reproduced or used in any manner without permission from the copyright holders. Use of this website means you agree to all of the Legal Terms and Conditions set forth by the owners.

This website is maintained by our
Graphics & Web Programming Team
in collaboration with Optical Microscopy at the
National High Magnetic Field Laboratory.

Last modification: Wednesday, Mar 22, 2017 at 10:49 AM

Access Count Since September 5, 2002: 298256

For more information on microscope manufacturers,
use the buttons below to navigate to their websites: